Neo 3C Eco Wood Burning Stove
High quality steel construction with cast iron door and top casting for strength and efficient heat transfer, the ACR NEO 3C ECO is a 'smoke exempt' appliance meaning you can burn wood in smoke controlled areas. An EcoDesign ready stove boasting low emissions.
The stunning ACR NEO 3C ECO is a modern designed, wood burning stove which features a large, glazed front door plus both sides are glazed too giving a superb view of the fire.
The Neo 3C ECO is everything you would expect from a fully featured, contemporary stove plus the benefit of DEFRA approval allowing you to burn wood in smoke controlled areas. It is also extremely clean burning having passed the stringent tests and is fully EcoDesign compliant.
The NEO 3C ECO has a huge glazed front door which is kept clean by a powerful airwash system. A convenient storage cupboard beneath is handy for storing kindling and logs. As with all Neo stoves in the range, the ashpan slides towards you to enable the lid to be fitted and then lift the ash pan out and carry outside safe in the knowledge the ashes are safely contained and won't blow about in the wind.
Impressive efficiency of 79% and suitable for installation on to a 12mm hearth.
Nominal heat output of 5kW meaning air-vent not normally required. 125mm (5") flue outlet which can be connected to either the top or rear of the stove. Simple to use single air control giving you the ultimate in control of the flames.
|Suitable for use in Smoke Controlled Areas||Yes|
|Nominal Heat Output||5kW|
|Total Heat Output Range||2.5kW to 7kW|
|Efficiency||72.3% gross / 79.4% nett|
|Hearth Requirement||Superficial non combustible 12mm hearth required (see Bldg Regs) - below 100 degrees|
|Flue Diameter||125mm (inside diameter)|
|Flue Location||Top or Rear|
|Max Log Length||40cm|
|Warranty||10 Years on casting|