Skip to content
Neo 1C Eco 5Kw Wood-Burning Stove with cupboard base
A stunning, contemporary styled stove from ACR Heat Products that has the benefit of DEFRA approval for use in smoke controlled areas. The Neo 1C Eco is also EcoDesign 2022 ready boasting low emissions to ensure a cleaner environment. Nominal heat output of 5kW ideal for standard sized rooms
The ACR Neo 1C Eco is everything you would expect from a fully featured, contemporary stove plus the benefit of DEFRA approval allowing you to burn wood in smoke controlled areas. Boasting low emissions, this latest 'Eco' model is a dedicated wood burning stove which has passed the EcoDesign 2022 directive.
The NEO 1C Eco has a huge glazed front door which is kept clean by a powerful airwash system. A convenient storage cupboard beneath is handy for storing kindling and logs. As with all Neo stoves in the range, the ashpan slides towards you to enable the lid to be fitted and then lift the ashpan out and carry outside safe in the knowledge the ashes are safely contained and won't blow about in the wind.
Impressive efficiency of up to 79% and suitable for installation on to a 12mm hearth.
Nominal heat output of 5kW meaning air-vent not normally required. 125mm (5") flue outlet which can be connected to either the top or rear of the stove. Simple to use single air control giving you the ultimate in control of the flames.
Download Instructions
(Manufacturers instructions are offered as a guide only and may not always be the latest version)
| Fuel | Wood only |
| EcoDesign Ready | Yes |
| Suitable for use in Smoke Controlled Areas | Yes |
| Nominal Heat Output | 5kW |
| Total Heat Output Range | 2.5kW to 7kW |
| Efficiency | 72.3% gross / 79.4% nett |
| Hearth Requirement | Superficial non combustible 12mm hearth required (see Bldg Regs) - below 100 degrees |
| Weight | 125kg |
| Flue Diameter | 125mm (inside diameter) |
| Flue Location | Top or Rear |
| Construction | Steel |
| Max Log Length | 40cm |
| Warranty | 10 Years on casting |
